EXFO MAX-890 - Signal - Signal Configuration (DSn;PDH)

Test Setup - Test Configurator, Timer, and System
MaxTester 167
Signal - Signal Configuration (DSn/PDH)
Signal - Signal Configuration (DSn/PDH)
For SONET/SDH - DSn/PDH BERT, from the test menu, tap Setup,
Test Configurator, and the protocol block. Only Framing setting and the
Loopback button are available.
For DSn/PDH BERT and NI/CSU Emulation, from the test menu, tap Setup,
Test Configurator, and the interface block.
Framing
Framing allows the selection of the framing used for transmission:
DS1 DS3 E1 E3/E4
Unframed
SF
ESF
a
SLC-96
a. Default value
Unframed
C-Bit Parity
a
M13
Unframed
PCM30
a
PCM30 CRC-4
PCM31
PCM31 CRC-4
Unframed
Framed
a