Test Setup - Test Configurator, Timer, and System
166 MAX-800 Series
Signal
Note: For both Frequency and Offset the following background colors are used:
Max. Negative Offset (ppm) indicates the maximum negative
frequency offset between the standard rate specification and the rate
from the received signal.
Max. Positive Offset (ppm) indicates the maximum positive
frequency offset between the standard rate specification and the rate
from the received signal.
Note: Refer to Interface on page 223 for more information on standard rate
specifications.
Signal Configuration
For OTN, refer to Signal - Signal Configuration (OTN) on page 175 for
more information.
For SONET/SDH, refer to Signal - Signal Configuration (SONET/SDH) on
page 177 for more information.
For DSn/PDH, refer to Signal - Signal Configuration (DSn/PDH) on
page 167 for more information.
Background color Description
Green The frequency is in range.
Red The frequency is out-of-range or LOC Lane. LOC is also
displayed.
Gray Pending state.
To Next Page
Loading...
