Test Setup - Test Configurator, Timer, and System
MaxTester 61
Test Configurator Overview
Test Configurator Overview
The Test Configurator tab displays the interconnected blocks composing
the test structure. Each block of the test structure gives an overview of its
configuration/status. Availability of each block depends on the selected test
application and its structure. Arrows are used to indicate the
interconnection between blocks as well as the direction of the clock and
data flow. Tap on a block to change the configuration parameters of this
block.
From the Test menu, tap Setup, and the Test Configurator tab.
The block arrangement represents the network under test. From any
block, either select the basic parameters or click on More for all
settings.
Local block displays and allows changing the basic interface
settings. Tap on the More button to access all settings.
Network block displays and allows changing the basic test settings.
Tap on the More button to access all settings.
Remote operation mode allows selecting the remote operation
mode. Tap on the button to change the remote operation mode.
Remote block displays and allows changing the basic remote
settings. Tap on the More button to access all settings.
To Next Page
Loading...
