Test Setup - Test Configurator, Timer, and System
184 MAX-800 Series
Streams - Profile
Streams - Profile
The Traffic Gen & Mon test application supports the configuration of up to
16 different streams individually.
From the Test menu, tap Setup, Test Configurator, the protocol block, and
the Profile tab.
Note: All parameters are configurable per stream.
Stream Selection and Activation
Select the stream to be configured by either using the left/right arrow or by
tapping over the stream numbers area then tapping on a specific stream
number. An orange background indicates the selected stream while a
green background indicates the streams that are enabled.
Stream associates a name to the selected stream number. Default
stream names are Stream 1 to Stream n.
Enable check box when selected (cleared by default) enables the
selected stream. However, the stream will be generated only when the
test is started while the global Enable TX check box is selected from
the Global tab.
To Next Page
Loading...
