Test Results
294 MAX-800 Series
Summary (RFC 2544)
Summary (RFC 2544)
From the Test menu, tap Results, and the Summary tab.
Start Time indicates the date and time the test was started. The date
and time is reset every time the test is restarted or reset. For Dual Test
Set, this is the only information available on the remote unit.
Test Recover y when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test Recover y field. Refer to
Power Failure Recovery on page 403.
Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 260.
Remote unit in use and locked for Dual Test Set indicates that this
unit is used for Dual Test Set as the remote unit.
Remote unit in Dual Test Set Mode indicates that this unit is set as
remote but the DTS Connection is not established.
To Next Page
Loading...
