EXFO MAX-890 - Logger

Test Results
260 MAX-800 Series
Logger
Logger
The Logger page displays color-coded events and pass/fail verdict.
From the Test menu, tap Results, and the Logger tab.
Sort By
Select the sorting order of the event logger entries:
 ID (default) displays the event logger entries in numeric ascending
order based on the ID column of the event logger table.
 Event displays the event Logger entries in alphanumeric ascending
order based on the Event column of the event logger table.
Time Mode
 Relative displays the time/duration fields based on the time elapse
since the beginning of the test or since the last test reset. The format of
the time is Dd HH:MM:SS.
 Absolute (default) displays the time/duration fields based on the date
and time the event occurred/ended. The time format depends on the
MAX-800 Series time settings.
For 24 hours, the time format is MM/DD HH:MM:SS.
For 12 hours, the time format is MM/DD HH:MM:SS <AM or PM>.
Closure Format
 Duration (default): Indicates the number of seconds within which the
event occurred. Test events like Test Started and Test Stopped will
have no duration.
 End Time: Indicates at what time the event has been completed or
cleared.