Test Setup - Test Applications
44 MAX-800 Series
RFC 2544
RFC 2544
RFC 2544 allows Ethernet Throughput, Back-to-Back, Frame Loss, and
Latency performance testing in accordance with RFC 2544 specifications.
The RFC 2544 test, in single port configuration, has to be executed in
conjunction with a remote unit. The remote unit can be either in loopback
configuration for unidirectional testing or in RFC 2544 Dual Test Set mode
for bidirectional testing.
The Dual Test Set test allows bi-directional testing between two
compatible units providing independent results for each test direction. The
results from local-to-remote and remote-to-local are available on the local
testing unit.
The Dual Port topology allows simultaneous and bidirectional traffic
generation and analysis at 100 percent wire-speed at any packet size.
To Next Page
Loading...
