Test Functions
314 MAX-800 Series
100 Advanced - Lanes Mapping & Skew
100 Advanced - Lanes Mapping & Skew
Note: Only available with parallel interfaces. Not available when the RS-FEC
check box is selected.
From the Test menu, tap Functions, 100 Advanced, and the Lanes
Mapping & Skew tab.
TX
PCS/Logical Lane, for Ethernet test applications, indicates the PCS
(Ethernet test applications) or Logical (Transport Test applications)
lane markers. To change the PCS/Logical lane order, see
Default/Random/Manual Mapping on page 316.
Skew (Bits) indicates the TX relative delay in bit time for each
PCS/Logical lane. To change the skew values, see Reset/Manual Skew
on page 317.
Lane / Physical Lane
For 100GE (4 Lanes), indicates the CAUI-4 Lane numbers.
For OTU4 (4 Lanes), indicates the OTL4.4 Physical Lane numbers.
To Next Page
Loading...
