Test Functions
MaxTester 317
100 Advanced - Lanes Mapping & Skew
Reset/Manual Skew
Allows the selection of a relative delay in bit time that will be introduced for
each PCS/Logical lane.
Reset Skew sets all TX skew (bit time) values to 0.
Manual Skew allows setting the skew value for each PCS/Logical lane
manually.
All Lanes, when selected, applies the change(s) to all PCS/Logical
Lane at once.
Skew Inc/Dec Size (bits) allows setting the increment/decrement
value that will be used when changing the TX Skew (bits) values
using the “+” and “-” buttons. Range is from 0 to 2047 for
100G/OTU4.
PCS/Logical Lane indicates the PCS/Logical Lane numbers and All
which represents the value for all PCS/Logical Lane when the All
Lanes check box is selected.
Skew (bits) allows setting the skew value for each lane. Enter
directly the skew value in the field or use the “+” and “-” buttons to
respectively increment or decrement the skew value using the
defined Skew Inc/Dec Size value. Tapping and holding the “+” or
“-” button allows reaching the desired value faster using the
defined Skew Inc/Dec Size value. Range is from 0 to 2047 for
100G/OTU4.
To Next Page
Loading...
