Test Control
394 MAX-800 Series
Report Button
Save Report
Auto-Generate File Name check box, when selected (default),
automatically generates the report file name which contains the
name of the test, the date (YY.MM.DD), and time (HH.MM.SS).
Clear the Auto-Generate File Name check box to enter a specific
file name.
File Name is the name of the report to be generated.
Save To is the file location where the report file will be saved (see
File Location on page 392).
Display Report after Saving check box when selected (default)
automatically displays the report once it is generated.
Note: Once generated, the report can be opened from the Open Tab on page 395.
Turn on Report Generation Prompt check box when selected
(default) displays a pop-up every time a test case is stopped or
completed to ask if a report generation is desired.
Format is the file format for the report: PDF (default) and HTML.
Logo check box when selected (default) allows including a logo to
the report. Select the logo picture that will be displayed on the
report.
To select another logo, first add a new logo by either copying the
logo picture file to the following folder or by using the
Import/Export (see page 396) then select the new logo from the
list.
Documents\800-MaxTester\Reports\Images
Supported picture file formats are jpg, gif, bmp, and png.
Save Report button generates and saves the report on the selected
media (Save to).
To Next Page
Loading...
