Introducing the FPM/FLS/FOT-600
Power Meter/Light Source/Optical Loss Test Set 3
Power Sources
Power Sources
The units operate with the following power sources:
AC adapter (connected to standard power outlet—indoor use only)
Compatible car outlet adapter available upon request.
Li-Ion rechargeable battery (automatically takes over if you unplug the
AC adapter)
Note: When it is connected with the AC adapter/charger, the unit will function
even if the battery is not present.
Possible to switch from AC adapter/charger to battery power or vice
versa without affecting operation.
The battery recharges automatically when the AC adapter/charger is
connected.
IMPORTANT
If the battery level becomes too low, the unit turns itself off.
Safety label
and serial number
(under the stand)
Quick reference
labels
USB connector
Battery
compartment
To Next Page
Loading...
