Test Setup - Test Configurator, Timer, and System
92 MAX-800 Series
Clock
Tributary Synchronization
Note: Only available with SONET/SDH - DSn/PDH and DSn/PDH test applications.
Not supported in Through topology.
Clock Mode allows selecting the source clock that will be used for tributary
transmission (TX); default is Internal. The availability of clock modes is as
follows:
Internal: Internal clock of the unit (STRATUM 3).
Recovered: Line clock from the input port signal involved in the
test.
External: Clock signal from the EXT CLK port.
Clock Synchronization Tributary Synchronization
Internal Internal
Recovered Internal
Recovered
External Internal
External
To Next Page
Loading...
