Test Setup - Test Configurator, Timer, and System
182 MAX-800 Series
Streams - Global
Streams - Global
From the Test menu, tap Setup, Test Configurator, the protocol block, and
the Global tab.
The following parameters are displayed and configurable per stream.
Check boxes:
The first check box (top-left) allows enabling stream(s) sequentially
within the limit of the link capacity.
The check boxes next to the stream numbers allow enabling each
stream individually within the limit of the link capacity.
Stream Name
1
indicates the name of each stream. Tap on the Stream
Name button to modify the name of each stream.
Frame Size
1
indicates the frame size of each stream. Tap on the Frame
Size button to modify the frame size of each stream.
TX Rate
1
indicates the transmission rate for each stream. Tap on the
TX Rate button to modify the transmission rate (see page 188).
Framing indicates the framing of each service. Tap on the Framing
button to modify the Frame Format, Network Layer, Transport Layer,
VLAN, and MPLS when applicable (see Modify Frame Structure from
the MAC/IP/UDP on page 121).
VLAN indicates the ID and Priority of each VLAN level for each stream.
Tap on the VLAN button to modify the VLAN settings (see VLAN from
the MAC/IP/UDP tab).
1. See the Profile tab for more information.
To Next Page
Loading...
