Test Results
258 MAX-800 Series
Graph (RFC 2544)
Graph (RFC 2544)
Displays the graph showing the Throughput, Back-to-Back, Frame Loss,
and Latency measurements. For Dual Test Set the graph shows results
from Local to Remote and Remote to Local using distinctive colors. For
Dual Port topology the graph shows results of both port directions.
From the Test menu, tap Results, and the Graphs tab.
All button allows viewing the graphs of all subtests simultaneously.
Throughput, Back-to-Back, Frame Loss, and Latency buttons allow
viewing an enlarged graph view of the selected subtest.
Displayed Results allows selecting the displayed results mode, either
Minimum, Maximum (default), Average, or Current.
Step, available with Frame Loss, allows selecting the result step
(100 percent by default) to be displayed.
The X axis shows the frame sizes while the Y axis shows the subtest
results.
Frame Size (Bytes) and Step (%), available with Frame Loss, allows
selecting either Frame Size (default) or Step as the X axis criterion.
To Next Page
Loading...
