Test Setup - Test Applications
52 MAX-800 Series
Through Mode
Through Mode
The Through Mode test application allows traffic to pass through the unit
using two electrical or optical ports for in-service troubleshooting of live
traffic between the carrier/service provider network and the customer’s
network.
Typical Through Mode test application:
Supported Interfaces/Rates: 10M to 10GE LAN and 100GE;
10/100/1000M electrical is supported when using an active copper SFP
and the RJ45 port on 860/860G/880 and using two active copper SFPs
on 890/890Q.
Tes t i n g U n i t
in Through Mode
Network Ethernet Network Ethernet
EXFO Unit
To Next Page
Loading...
