Test Results
298 MAX-800 Series
Summary (Traffic Gen & Mon)
Out-of-Sequence: See Streams - Frame Loss / Out-of-Sequence on
page 278.
Stream indicates the stream number and provides stream detailed
statistics when tapping on its button.
The following statistics are displayed for the selected stream.
Stream Selection: Select a stream by either using the left/right
arrow or by tapping over the stream numbers area then tapping on
a specific stream number. An orange background indicates the
selected stream.
Throughput, Jitter, and Latency meters display respectively the
measured Throughput, Jitter, and Latency for the selected stream.
Note: The green region defined by the configured threshold corresponds to a
PA SS verdict while the red regions corresponds to a FAIL verdict. The
Pass/Fail verdict is only displayed when enabled (see QoS Metrics on
page 190).
Jitter: See Streams - Jitter on page 278.
Latency: See Streams - Latency on page 279.
RX Rate: See Streams - Throughput on page 280.
RX Frame Count indicates the number of frame received
matching the selected stream.
TX Rate: See Streams - Throughput on page 280.
TX Frame Count indicates the number of transmitted frames
matching the selected stream.
Frame Loss and Out-of-Sequence: See Streams - Frame Loss /
Out-of-Sequence on page 278.
To Next Page
Loading...
