Introducing the PPM-350D PON Power Meter
2 PPM-350D
Main Features
Supports:
10 G-capable PON networks
Port 1: ONT (optical network terminal) at 1270, 1310, 1524-1544,
1550, 1610 nm; depending on the selected option.
Port 2: OLT (optical line termination) OLT at 1490, 1575-1580,
1596-1603, 1610, and RFoG (RF over Glass) at 1555 nm; depending
on the selected option.
Pass-through device (spy mode) that does not block communication
between ONT and OLT.
Allows triple-play testing (voice, video and data).
Measures each signal independently up to two PON layers + RF
overlay.
Measures optical power of any type of signal:
Continuous (for example, TV signal at 1550 nm)
All baud rates (for example, 1 and 10 Gbps; synchronous or
asynchronous).
Measures all signals simultaneously.
Displays all signal statuses simultaneously on screen as well as a global
status.
Displays all power levels simultaneously.
Contains several different test configurations. You can configure
thresholds on a computer and transfer them to your PPM-350D with a
smart device and Bluetooth connection.
Touchscreen interface.
To Next Page
Loading...
