Introducing the PPM-350D PON Power Meter
PON Power Meter 5
PON-aware
TM
Feature
PON-aware
TM
Feature
The PON-aware feature in the PPM-350D automatically detects and adapts
test parameters and thresholds for the PON technology in use at the
customer premises on multiple service networks. These new capabilities
eliminate costly guesswork during the critical service activation phase. The
feature enables you to accurately test and thereby fix any customer
connections during service activation for legacy and next-gen PON
technologies such as GPON, EPON, XG-PON1, XGS-PON, 10G-EPON, and
NG-PON2.
When used in a pass-through configuration on the ONT side of the splitter,
start with selecting a configuration representing your multi-service network
(GPON+XGS, GPON+NG-PON2, EPON+10G-EPON, etc). Using the
wavelength detected from the ONT, the unit will figure out if the ONT is
operating in GPON/EPON or in XG/XGS/NG-PON2/10G-EPON. It will then
apply the global pass/fail status only to the corresponding service in your
configuration. The rest of the measurements will still be shown with their
respective status, but they won't affect the global status.
Note: The PON-aware feature can only discriminate between GPON/EPON and
XG/XGS/NG-PON2/10G-EPON.
To Next Page
Loading...
