Exmark LAZER Z - Page 14

13
KAWASAKI LIQUID-COOLED FUEL GROUP
Ref.
No.
Qty.
Part No. Description Req'd.
Ref.
No.
Qty.
Part No. Description Req'd.
1 513508 Cap, fuel tank ......................... 2
16
*
803028 Screw, Machine 10-24x5/8...... 4
2
643017 Tank, fuel (RH) ....................... 1
17
802002 Screw, thread cut 10-32x1/2 ... 3
3
633967 Tank, fuel (LH)........................ 1
18
643013 Cover, gauge........................... 1
4
303308 Clamp, hose ........................... 1
19
804267 Nut, thin nyloc 5/16-18 ............ 6
5
543456 Fuel line ................................. 3
20
633349 Spring, fuel tank ...................... 6
6
303077 Clamp, fuel line....................... 9
21
805257 Washer, 5/16 SAE...................10
7
!
Kawasaki
P/N 49040-2065 Fuel Pump.. 1
22
"
633023 Stud, fuel tank ......................... 6
8
643270 Fuel line ................................. 1
23
800251 Screw, 1/4-20 x 5/8 ................. 1
9
!
Kawasaki
P/N 49019-1055 Fuel Filter ... 1
24
805004 Washer, lock 1/4 ..................... 1
10
303426 Fuel line ................................. 1
25
513762 Clip, loom .50 .......................... 1
11
633347 Valve, fuel............................... 1
26
800252 Screw, Cap 1/4-20x3/4............ 2
12
543277 Elbow, strainer........................ 2
27
805255 Washer, flat SAE 1/4............... 2
13
513645 Bushing................................... 2
28
809012 Nut, whizlock 1/4-20................ 2
14 643014 Bracket, gauge mount ............ 1 29
805005 Washer, lock 5/16 ................... 4
15 303435 Washer, disc spring 1/4.......... 4 30
800271 Screw, 5/16-18 x 3/4 ............... 4
"
Use Prolock, Retaining type (Part No. 840023), .5cc tube on stud threads going into the tank.
!
Refer to Engine Owner’s Manual (Fuel Filter
Must
be 40 Micron or smaller).
•
Snug fit only on slotted holes,
Do Not Overtighten
, tank must be able to expand.