Expobar BREWTUS IV - Page 15

15
d)
Insert the water softener filter inside the reservoir.
e)
Drain the water from the reservoir through the water softener filter.
To drain the water from the reservoir:

Place the plastic tube as it is indica
ted.

Suck in the tube until it fills with water.

Press your finger over the inlet from the tube.

With your finger over the tube
, place the inlet from the tube downwards
(as indicated). Wait until the reservoir is completely empty.
Once the water reservoir
is empty, fill it again with water (
do not add
salt) and
repeat the process
in order to clean the water softener filter.
Plastic tube
Drain the water from the tank
this way
Wat
er tank filled with salty water
Water softener filter
Salty water outlet
Litres
of softened water, depending on its harness
(In French Degrees
°TH
)
Salt
Water
Hardness
20
30
40
60
80
Grams
Maximum
Volume of water
softened
by filter
11
9
8
7
5
300