Expobar BREWTUS IV - 1. Unpacking the machine; 2. Controls and Programming

3
1.
Unpacking the machine.
The Brewtus
IV is a very heavy machine
(over 60lbs
)
,
so please use
cau
tion
when
unpacking the unit
.
To remove the Brewtus, turn
the box upside down, open the bottom
four flaps,
then
turn the box right
-
side
-
up and lift the box straight up. Then
,
lay the
machine down on its side and remo
ve the top layer of foam. C
arefully remo
ve the
machine from the bottom layer of foam. It is easier to have a second pers
on helping you
with the removal process,
as the machine is heavy and the bottom layer of foam may
stick to the machine.
2.
Controls and Programming
Control Lever
Main Power Switch
PID Control Pane
l
Steam Boiler Light
Hot
-
Water Knob
Hot Water Wand
Steam Boiler
Pressure Gauge
No
-
Burn Steam Wand
Steam Boiler On/Off
Switch
E61 Brew Group
Cup Warmer and Reservoir A
ccess
for
Br
ewtus
M
odels
E
quipped with a
Water R
eservoir.
Removable Drip
T
ray
Portafilter handle
Brew Pressure
Gauge
Steam Knob