CARAT
16
PROGRAMMING
Electronic control panel
Button functions
Here some of the additional functions that the electronics offers:
Volume control of four different espresso drinks per brewing group.
Time-controlled hot water dispensing.
Automatic filling and level control of the boiler.
Automatic switch off of the heating element if not enough water.
System supervision through alarms.
Automatic cleaning of the brew groups
The control panel is by default programmed with 4 standard drinks (these can be reprogrammed as
you wish) and a continuous selection. The first four keys (1 short espresso, 1 long espresso, 2 short
espresso, 2 long espresso) brew the programmed volume and then stop automatically, the fifth key
brews continously untill user stops it by pressing button again.
1 Short Espresso
1 Long Espresso
2 Short Espresso
2 Long Espresso
Continuous
Depending on how long this button is pressed it has 3 functions:
Less than 1 second, activates the hot water for infusions dosing.
Between 1 and 8 seconds, activates continuous espresso dispensing, in
order to stop the dispensing, press the button again.
Over 8 seconds, activates the programming menu. This is explained later
in programming part.
Water Button
Steam Button
Display
Shows temperature and water lever of the boiler.
Option to show time and date.
Publicity
EXPOBAR
Max
hh:mm
day
o
C
Min
To Next Page
Loading...
