Expobar CARAT 2GR - Programming capabilities with buttons

CARAT
26
PROGRAMMING
Contrast
Colour ON
Colour OFF
In this menu(See fig.A), the contrast of the display lightning is set. It can be
adjusted between the values of 0 and 50. To adjust it use the one short
espresso
(+) or one long espresso (-).
The effect can be seen directly on the display.
To accept the selection made and proceed to the next menu, press the
continuous button .
Contrast
0 - 50
Colour state ON
Colour
Colour state OFF
Colour
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
Fig. A
Fig. B
Fig. C
Now, the colour of the display while in “OFF” state is set(See fig.C). To
toggle between the different options use the one short espresso
(+) or one long espresso (-). The effect of the option
selected can be observed directly on the machine.
- Spanish - German - Italian - French - English
← ( - )
(one long espresso) → (+) (one short espresso)
To accept the selection made and proceed to the next menu, press the
continuous button
.
Here, the colour of the display while in “ON” state is set(See fig.B). This
means that it can be different when the machine is in the “OFF” status.
To toggle between the different options use the one short espresso
(+) or one long espresso (-). The effect of the option
selected can be observed directly on the machine.
- Spanish - German - Italian - French - English
← ( - )
(one long espresso) → (+) (one short espresso)
To accept the selection made and proceed to the next menu, press the
continuous button .