Expobar CARAT 2GR - Name 1: Adjust the Publicity Message on the Display (Superior Line); Name 2: Adjust the Publicity Message on the Display (Inferior Line); Service Pone

CARAT
27
PROGRAMMING
Name 1: Adjust the publicity message on the display (superior line)
Name 2: Adjust the publicity message on the display (inferior line)
Service pone
The message shown (See fig.A) on the 2 superior lines of the display can be
adjusted here and in the following menus.
Here the first row will be adjusted.
To modify the selected letter for the blinking character press the one short
espresso
(+) or one long espresso (-).
To accept the selected character and proceed to the next one, press the
button
(2 short espresso).
To accept the line and proceed to the next menu, press the continuousbrewing
button.
In this menu (See fig.B) the second row of the customizable lines is set.
To modify the selected letter for the blinking character press the one short
espresso
(+) or one long espresso (-).
To accept the selected character and proceed to the next one, press the
button
(2 short espresso).
To accept the line and proceed to the next menu, press the continuousbrewing
button.
In this menu (See fig.C), it is set the telephone number shown when
the warning caused by reaching the number of services set for technical
maintenance.
To modify the selected number for the blinking character press the one
short espresso
(+) or one long espresso (-).
To accept the selected character and proceed to the next one, press the
button
(2 short espresso).
To accept the line and proceed to the next menu, press the continuous
brewing button.
Name1
AAAAAAAAAAAAAAA
Name2
AAAAAAAAAAAAAAA
Service Phone
Telephone Nr
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
Fig. A
Fig. B
Fig. C