CARAT
30
PROGRAMMING
Grinding notice
Grinding notice
Adjusting parameters of the grinding notice
This setting enables or disables the brewing monitor(See fig.A). This function
analyzes the output flow when brewing, and depending on it, advises if the
grinded coffee is too thin or too coarse. If the brewing flowrate was between
limits, it will display “Ok” at the end of the brewing process.
To enable it, press the button (one short espresso), to disable it,
press the button
(one long espresso).
To accept the setting and proceed to the next menu, press the continuous
button .
The blinking of the keypads lights have different behavior modes that can
be toggled by pressing the button
(one short espresso) and
(one long espresso).
The options are: Enabled, disabled & Rotation leds.
To accept the setting and proceed to the next menu, press the continuous
button
.
If in the previous section the grinding notice was enabled, in this menu, its
parameters can be adjusted. If it was disabled, this menu will not appear.
Here it is adjusted the minimum flow rate that will be considered as inferior
limit of a good brewing flowrate.
To increase this value, press the button (one short espresso),
to decrease it, press the button
(one long espresso).
To accept the setting and proceed to the next menu, press the
continuous button
.
Here it is adjusted the maximum flow rate that will be considered as superior
limit of a good brewing flowrate.
To increase this value, press the button (one short espresso),
to decrease it, press the button
(one long espresso).
To accept the setting and proceed to the next menu, press the continuous
button
.
Grinding Notice
Enabled/disabled
Led Idle
option
Thin Grinding
X.X
Thick Grinding
X.X
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
Fig. A
Fig. D
Fig. B
Fig. C