DIAMANT
24
PROGRAMMING
Water Button
Turbo Steam
Button
Digital control panel
Button function overview
The following functions can be programmed and controlled from the digital display:
Volume control of four different espresso drinks per brewing group.
Timed hot water dispensing.
Automatic boiler filling and level control.
Automatic heating element shut-down in event of a low water condition.
System supervision through messages, warning, and alarms.
Automatic cleaning of the brewing groups.
The digital controller is programmed with four standard drink functions (these can be reprogrammed
as desired by the user) and one continuous function from the manufacturer.
The upper four buttons (1 Short Espresso, 1 Long Espresso, 2 Short Espressos, 2 Long Espressos) will
brew the programmed beverage volume and then stop automatically.
The fifth/bottom button (Continuous) brews continuously until the user stops it by pressing the
button again.
1 Short Espresso
1 Long Espresso
2 Short Espressos
2 Long Espressos
Continuous
Depending on how long this button is pressed, it has 3 separate functions:
Less than 1 second activates the hot water outlet.
Between 1 and 8 seconds activates continuous espresso dispensing through
the capsule group. To stop the dispensing, press the button again.
Longer than 8 seconds activates the programming menu (see pages 25-31).
Digital Display
Displays boiler
temperature and
water level.
Displays date and
time (optional, if
desired).
1 Short Espresso
2 Short Espressos
1 Long Espresso
2 Long Espressos
Continuous
To Next Page
Loading...
