Expobar diamant - Display Information Overview; Adjusting Date and Time Settings

DIAMANT
26
PROGRAMMING
Accessing the Date and Time Program:
1. Press the Continuous button
for 8 seconds. All buttons on the
keypad will light up and Continuous button will flash. The machine is now in
the “Doses” Program (See fig. A).
2. Press the Continuous button
again for 8 seconds and the “Clock
Adjust” Program will appear (See fig. B).
Setting the Date and Time:
3. From within the “Clock Adjust” Program press the 2 Short Espresso button
once, the “HH” hour indicator will begin to flash. (See fig. C)
4. Adjust the Hour up or down using the 1 Short Espresso
and 1 Long
Espresso buttons
until the desired hour is showing. Then press the
2 Short Espresso button
to move on and adjust the Minute (MM)
and date (Day) in the same manner.
Publicity
EXPOBAR
Machine Name
Boiler Water
Level Indicator
Boiler Temperature
Indicator
Max
hh:mm
day
Time and Date
o
C
Min
Display overview
Doses Programming
Select 30s
Clock Adjust
HH:MM Day
fig.A
fig.B
The digital display provides information, warnings, and controls for:
Boiler’s water volume and temperature.
Coffee brewing and beverage dosing time adjustment.
Low water, temperature sensor, and filter service alarms and warnings .
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
Adjusting the display date and time
Clock Adjust
HH:MM Day
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
fig.C