Expobar ELEN Service Manual

30
Elen
R
SERVICE PROgRAMMINg
Name 1: Programming the Welcome Message (upper line)
Name 2: Programming the Welcome Message (lower line)
Helpline
The display comprises two rows of 16 characters. The Welcome Messages displayed on
these two lines can be edited in this menu (see fig. 13) and the next one.
To edit "Name 1" (line 1):
To change the flashing character, press the 1 Short Espresso (+) and 1 Long
Espresso
(-) buttons.
To accept the character and move on to the next one, press "OK" (2 Short
Espressos button
).
To accept the setting selected and move on to the next menu, press the Continuous
Dispensing button
.
Name 1
xxxxxxxxxxxxxxxx
Fig. 13
This menu (see fig. 14) is used to edit the Welcome Message shown on the display's
bottom line.
To change the flashing character, press the 1 Short Espresso (+) and 1 Long
Espresso
(-) buttons.
To accept the character and move on to the next one, press "OK" (2 Short
Espressos button
).
To accept the setting selected and move on to the next menu, press the Continuous
Dispensing button .
Name 2
xxxxxxxxxxxxxxxx
Fig. 14
This menu (see fig. 15) is used to edit the telephone number displayed when the
service alert counter reaches the value set for the maintenance cycle.
To edit the flashing number, press the 1 Short Espresso (+) and 1 Long
Espresso
(-) buttons.
To accept the number and move on to the next one, press "OK" (2 Short Espressos
button
).
To accept the setting selected and move on to the next menu, press the Continuous
Dispensing button
.
Helpline
Telephone number
Fig. 15

Expobar ELEN Specifications

General

Brand	Expobar
Model	ELEN
Category	Coffee Maker
Language	English