Extra 300/SC - Page 189

CHAPTER 27
PAGE 23
MAINTENANCE MANUAL EXTRA 300/SC
PAGE DATE: 1. August 2014
27-20-04 Fairleads
Removal/Installation
1 Remove the fairlead retaining clip.
2 Pull the fairlead halves out of the sleeve.
3 Reverse procedure to install the fairlead.
27-20-05 Rudder Pedals
Removal/Installation
1 Remove control cable as per Chapter 27-20-03.
2 Drain the brake system.
3 Disconnect the brake lines from the pedal.
4 Remove the four rudder pedal attachment bolts.
5 Remove the rudder pedal.
6 Install in reverse sequence of removal. Follow Chapter 27-
20-03 for installation of control cables.