CHAPTER 73
PAGE 19
MAINTENANCE MANUAL EXTRA 300SC
PAGE DATE: 1. August 2014
4 Remove the sense line.
5 Install in reverse sequence of removal. Torque sense line
fittings with 15.3 – 16.9Nm (135-150lbs-inch) and apply
inspection lacquer.
73-30-15 Fitting
Removal/Installation
1 Remove cowling per chapter 71:
2 Disconnect the sense line as per chapter 73-30-12.
3 Remove the fitting.
4 Install in reverse sequence of removal.
To Next Page
Loading...
