EasyManua.ls Logo

Extra EA 500 - Section 8 - Handling, Servicing and Maintenance; Cleaning the Display

Default Icon
400 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 901 Pilot’s Operating Handbook
Avidyne IFDs and CDU EXTRA 500
Altitude Capture Mode;
HDG (Heading Capture/Hold Mode);
NAV Mode;
GPSS (GPS Steering) Mode.
Note One of the horizontal modes (HDG, NAV, GPSS) must be
engaged on the S-Tec System 55X control head before a
vertical mode can be used.
Note When HDG mode is engaged, rotation of the heading bug
greater than 180 degrees may result in a reversal of turn
direction.
901.8 Section 8 – Handling, Servicing and Maintenance
901.8.a Cleaning the Display
If the IFD screen should become dirty due to fingerprints or
dust, clean the screen using the following materials and
methods:
1 A clean, soft lint-free cloth such as 3M Ultra-Brite Cloth #2011
or similar
2 A cleaning solution composed of de-ionized water. Do not use
any alcohol-based product. Always apply the cleaning solution
directly on the cloth. Never spray cleaner directly on the screen.
The use of any 3rd party screen protector, especially those that
adhere directly to the IFD display glass, is not endorsed by
Avidyne and may void the warranty for any display related
issue.
901-20 26. January 2011

Table of Contents

Related product manuals