Extraflame 00227596 - Counters Memories; Default

P6
P2
P6
P2
12
PARAMETER
VALUE
Hours p1
Hours p2
Hours p3
Hours p4
Hours p5
Total hours
Part hours
Ignition
mem 1 alarms
ALARM
mem 2 alarms
mem 3 alarms
mem 4 alarms
mem 5 alarms
TECHNICIAN MENU
COUNTERS MEMORIES
CONTROLS PROCEDURE
 Press P6 and SET CLOCK will appear.
 Press P2 several times until TECHNIC SET is displayed.
 Press P6.
 Hold key P4 down to reach the reserved code "A0"
 When the code has been reached, conrm by pressing P6
 "GENERAL DATA" will appear
 Press P2 until COUNTERS MEMORIES is displayed.
 Enter pressing P6
 Use P2 to browse through the readout and P3 to go back.
 Press P1 to return to the previous menus up to the initial status.
DEFAULT
CONTROLS PROCEDURE
 Press P6 and SET CLOCK will appear.
 Press P2 several times until TECHNIC SET is displayed.
 Press P6.
 Hold key P4 down to reach the reserved code "A0"
 When the code has been reached, conrm by pressing P6
 "GENERAL DATA" will appear
 Press P2 until DEFAULT is displayed.
 Enter pressing P6
 Hold key P4 down to reach code "o1" and conrm with P6.
 "LOADED DATA" will be signalled on the display to conrm the command
GENERAL DATA
TECHNIC SET
CODE A0
COUNTERS
MEMORIES
GENERAL DATA
TECHNIC SET
CODE A0
DEFAULT
NOTE: ALL CHANGES WILL BE RESET. ONLY THE COUNTERS MEMORIES WILL REMAIN UNCHANGED