Extraflame 00227596 - Ducted Data; Installer

P6
P2
P6
P2
9
INSTALLER
FIRMWARE VXX
PI00
P15
+/- 30%
PI01
P15
+/- 30%
PI02 0
DUCTED DATA
FIRMWARE VXX
PC00
P1
170
PC01
P5
190
PC02
OFF
180
PC03
ALARM
220
TECHNICIAN MENU
INSTALLER
CONTROLS PROCEDURE
 Press P6 and SET CLOCK will appear.
 Press P2 several times until TECHNIC SET is displayed.
 Press P6.
 Hold key P4 down to reach the reserved code "A0"
 When the code has been reached, conrm by pressing P6
 "GENERAL DATA" will appear
 Press P2 until INSTALLER is displayed.
 Enter pressing P6
 To modify a single parameter, press P4 or P5, to
continue and memorise press P2, to retrocede in the various
parameters press P3.
 Press P6 to conrm and P1 to return to the previous menus up to the initial
status.
DUCTED DATA
CONTROLS PROCEDURE
 Press P6 and SET CLOCK will appear.
 Press P2 several times until TECHNIC SET is displayed.
 Press P6.
 Hold key P4 down to reach the reserved code "A0"
 When the code has been reached, conrm by pressing P6
 "GENERAL DATA" will appear
 Press P2 until DUCTED DATA is displayed.
 Enter pressing P6
 To modify a single parameter, press P4 or P5, to
continue and memorise press P2, to retrocede in the various
parameters press P3.
 Press P6 to conrm and P1 to return to the previous menus up to the initial
status.
GENERAL DATA
TECHNIC SET
CODE A0
INSTALLER
GENERAL DATA
TECHNIC SET
CODE A0
DUCTED DATA
THE DATA IN THE TABLES ARE FOR ILLUSTRATION PURPOSES ONLY