4
DISPLAY ICONS KEY
Indicates the receipt of the radio signal
On = during radio communication
O = no radio communication
Fixed light = serial input deactivated
Indicates the status of the additional thermostat input (GND - I3)
It indicates functioning of the fumes motor.
O = ue gas motor deactivated
On = ue gas motor active
Flashing = breakdown
It indicates functioning of the ducted motor
O = Motor deactivated
On = Motor active
Flashing = the motor is running at minimum and in modulation
mode (additional input open)
It indicates functioning of the tangential fan (where present)
O = not working
On = working
Flashing = motor at minimum
Indicates the activation of the F1 function (future set-up)
O = function deactivated
On = function active
It indicates functioning of the pellet feed motor.
O = pellet feed motor deactivated
On = pellet feed motor active.
It indicates weekly programming functioning
Indicator on = Weekly programming active
Indicator o = Weekly programming not active
indicates the compensation function
O = the function is deactivated
On = the function is active
Indicates the stove modulation
On = the stove is working at the set power
Flashing = the power at which the stove is working is dierent to
the power set, the stove is modulating (for various reasons)
Indicates the contact of the external additional thermostat
closed contact: the contact of the external
additional thermostat is closed and
the STBY function is deactivated
Open contact: the contact of the external
additional thermostat is open and
the STBY function is deactivated
Flashing with closed
contact:
the contact of the external
additional thermostat is closed and
the STBY function is activated
Flashing with open
contact:
the contact of the external
additional thermostat is open and
the STBY function is activated
Indicates the presence of an alarm.
On: indicates the presence of an alarm
O: indicates the absence of alarms
Flashing: indicates the deactivation of the depression sensor.
Indicates the environment temperature status
O = the T° read by the probe is over the set temperature set
On = the T° read by the probe is below the set temperature set
Feed box probe
O = probe ok
On = broken probe (short circuit or open)
Flashing = tank cause modulation
CONTROL BOARD
BUTTON
ON/OFF
DISPLAY OF VARIOUS
TEXT MESSAGES
OPERATION
POWER ADJUSTMENT
TEMPERATURE
SETTING
TO ACCESS
THE MENU
CONTROL BOARD
To Next Page
Loading...
