Extraflame 00227596 - Reset Part Hours; Unlock

P6
P2
P6
P2
13
TECHNICIAN MENU
RESET PART HOURS
CONTROLS PROCEDURE
 Press P6 and SET CLOCK will appear.
 Press P2 several times until TECHNIC SET is displayed.
 Press P6.
 Hold key P4 down to reach the reserved code "A0"
 When the code has been reached, conrm by pressing P6
 "GENERAL DATA" will appear
 Press P2 until RESET PART HOURS is displayed.
 Enter pressing P6
 Hold key P4 down to reach code "77" and conrm with P6.
 "DONE" will be signalled on the display to conrm the command
UNLOCK
CONTROLS PROCEDURE
 Press P6 and SET CLOCK will appear.
 Press P2 several times until TECHNIC SET is displayed.
 Press P6.
 Hold key P4 down to reach the reserved code "A0"
 When the code has been reached, conrm by pressing P6
 "GENERAL DATA" will appear
 Press P2 until UNLOCK is displayed.
 Enter pressing P6
 Hold key P4 down to reach code "77" and conrm with P6. Hold key P1
down until the alarm signal disappears.
GENERAL DATA
TECHNIC SET
CODE A0
RESET PART HOURS
GENERAL DATA
TECHNIC SET
CODE A0
UNLOCK