22
MAINTENANCE
CLEANING
The images are for illustration purposes. They could be oset from the original models.
CLEANING THE HEAT EXCHANGER:
The heat exchangers chamber must be cleaned every month as the soot deposited on the rear of the cast iron hearth wall blocks the regular
ow of fumes. It is therefore recommended to remove the ash in the combustion chamber at least once a week using a suitable suction device.
The lever must be turned upwards to remove the cast iron part
BURN POT:
Remove the burn pot from the relevant compartment and free the
holes using the appropriate re irons supplied, remove the ash
from the burn pot using a suction device.
Suck the ash deposited in the brazier compartment.
SCRAPERS :
Use the scrapers, using an upward movement (for models with upper
scrapers) or pulling and pushing the same (for the inserts and models
with front scrapers).
Note: scrapers are preferably used when the stove is cold; if used
when the stove is hot, it is recommended to use special gloves to
protect against the heat.
THE IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY
To Next Page
Loading...
