7. LANGUAGE SELECTION
To select the language, proceed as follows:
1. Switch the power supply to the stove off and then on again using the master switch or the
power cable.
2. The display will show the following items in sequence, before arriving at “OFF”:
• Microprocessor version (EXTRAH2O_2 or later)
• Mode selection (WINTER –factory-set)
• Language (LANGUAGE)
• Current day and time adjustment (CLOCK)
• Level (LEVEL – setting reserved for an authorised technician)
3. When the word “LANGUAGE” appears, press button 5 to access the language selection
function.
4. Display D1 will show the language currently selected; D2 will show “LANG”: use buttons 2
and 3 to select the desired language:
ITALIANO – ENGLISH – DEUTSCH – FRANCAIS
5.
When you have made your selection, press button 1 to confirm and exit.
8. CURRENT DAY AND TIME SETTINGS
To set the current time, proceed as follows:
1. Switch the power supply to the stove off and then on again using the master switch or the
power cable.
2. The display will show in sequence, before arriving at “OFF” , the following items:
• Microprocessor version (EXTRAH2O_2 or later)
• Mode selection (WINTER factory-set)
• Language (LANGUAGE)
• Current day and time adjustment (CLOCK)
• Level (LEVEL – setting reserved for an authorised technician)
3. When the word “CLOCK” appears, press button 5 to access the setting mode.
4. Display D1 will show a day of the week (from DAY1 to DAY7): use the buttons 2 and 3 to
set the current day, and confirm with button 5.
Display D1 Meaning
DAY 1 Monday
DAY 2 Tuesday
DAY 3 Wednesday
DAY 4 Thursday
DAY 5 Friday
DAY 6 Saturday
DAY 7 Sunday
5. On display D1, the hour is flashing, whereas the minutes are stable. Enter the current hour
using buttons 2 and 3. Confirm with button 5.
6. On display D1, the hours are now stable and the minutes are flashing. Enter the current
minutes using buttons 2 and 3.
To go back to hour setting, press button 4; otherwise confirm and exit with button 1.
To Next Page
Loading...
