Extreme Networks ExtremeSwitching 210-12t-GE2 User Manual

•
To view the network information, enter show network
•
To save these changes so they are retained during a switch reset, enter the following command:
copy system:running-config nvram:startup-config
For details, see the ExtremeSwitching 200 Series Switches Administration Guide.
After the switch is connected to the network, you can use the IP address for remote access to the switch
by using a web browser or through Telnet or SSH.
Basic Configuration for Your Switch
ExtremeSwitching 210 and 220 Series Switches: Hardware Installation Guide 62

Extreme Networks ExtremeSwitching 210-12t-GE2 Specifications

General

Brand	Extreme Networks
Model	ExtremeSwitching 210-12t-GE2
Category	Switch
Language	English