Commands for Configuring and Monitoring EAPS
Summit24e3 Switch Installation and User Guide 131
Preforwarding Timer interval:
1
The configured value of the timer. This value is set
internally by the EAPS software.
Last update:
1
Displayed only for transit nodes; indicates the last
time the transit node received a hello packet from the
master node (identified by its MAC address).
EAPS Domain has … Controller Vlans: Lists the assigned name and ID of the control VLAN.
EAPS Domain has … Protected Vlans:
2
Lists the assigned names and VLAN IDs of all the
protected VLANs configured on this EAPS domain.
Number of Protected Vlans: The count of protected VLANs configured on this
EAPS domain.
1. These fields apply only to transit nodes; they are not displayed for a master node.
2. This list is displayed when you use the detail keyword in the show eaps command.
Table 30: show eaps Display Fields (continued)
Field Description
To Next Page
Loading...
