Using the Simple Network Time Protocol
Summit24e3 Switch Installation and User Guide 69
SNTP Configuration Commands
Table 19 describes SNTP configuration commands.
+1:00 +60 CET - Central European
FWT - French Winter
MET - Middle European
MEWT - Middle European Winter
SWT - Swedish Winter
Paris, France; Berlin, Germany;
Amsterdam, The Netherlands;
Brussels, Belgium; Vienna,
Austria; Madrid, Spain; Rome,
Italy; Bern, Switzerland;
Stockholm, Sweden; Oslo,
Norway
+2:00 +120 EET - Eastern European, Russia
Zone 1
Athens, Greece; Helsinki, Finland;
Istanbul, Turkey; Jerusalem,
Israel; Harare, Zimbabwe
+3:00 +180 BT - Baghdad, Russia Zone 2 Kuwait; Nairobi, Kenya; Riyadh,
Saudi Arabia; Moscow, Russia;
Tehran, Iran
+4:00 +240 ZP4 - Russia Zone 3 Abu Dhabi, UAE; Muscat; Tblisi;
Volgograd; Kabul
+5:00 +300 ZP5 - Russia Zone 4
+5:30 +330 IST – India Standard Time New Delhi, Pune, Allahabad,
India
+6:00 +360 ZP6 - Russia Zone 5
+7:00 +420 WAST - West Australian
Standard
+8:00 +480 CCT - China Coast, Russia Zone
7
+9:00 +540 JST - Japan Standard, Russia
Zone 8
+10:00 +600 EAST - East Australian Standard
GST - Guam Standard
Russia Zone 9
+11:00 +660
+12:00 +720 IDLE - International Date Line
East
NZST - New Zealand Standard
NZT - New Zealand
Wellington, New Zealand; Fiji,
Marshall Islands
Table 19: SNTP Configuration Commands
Command Description
config sntp-client [primary | secondary] server
[<ipaddress> | <host_name>]
Configures an NTP server for the switch to
obtain time information. Queries are first
sent to the primary server. If the primary
server does not respond within 1 second,
or if it is not synchronized, the switch
queries the second server.
Table 18: Greenwich Mean Time Offsets (continued)
GMT
Offset in
Hours
GMT Offset
in Minutes
Common Time Zone
References Cities
To Next Page
Loading...
