90 Summit24e3 Switch Installation and User Guide
Forwarding Database (FDB)
FDB Configuration Examples
The following example adds a permanent entry to the FDB:
create fdbentry 00:E0:2B:12:34:56 vlan marketing port 4
The permanent entry has the following characteristics:
• MAC address is 00:E0:2B:12:34:56.
• VLAN name is marketing.
• Port number for this device is 4.
This example associates the QoS profile qp2 with a dynamic entry that will be learned by the FDB:
create fdbentry 00:A0:23:12:34:56 vlan net34 dynamic qosprofile qp2
This entry has the following characteristics:
• MAC address is 00A023123456.
• VLAN name is net34.
• The entry will be learned dynamically.
• QoS profile qp2 will be applied when the entry is learned.
Displaying FDB Entries
To display FDB entries, use the following command:
show fdb {<mac_address> | vlan <name>
| ports <portlist> | permanent}
where the following is true:
•
mac_address — Displays the entry for a particular MAC address.
•
vlan <name> — Displays the entries for a VLAN.
•
ports <portlist> — Displays the entries for a slot and port combination.
•
permanent — Displays all permanent entries, including the ingress and egress QoS profiles.
With no options, the command displays all FDB entries.
To Next Page
Loading...
Need help?
General
