Extreme Networks Summit Summit24 - Chapter 5 Managing the Switch; Overview

Summit24e3 Switch Installation and User Guide 49
5 Managing the Switch
This chapter describes the following topics:
• Overview on page 49
• Using the Console Interface on page 50
• Using Telnet on page 50
• Using Secure Shell 2 (SSH2) on page 53
• Using SNMP on page 54
• Authenticating Users on page 56
• Using Network Login on page 62
• Using the Simple Network Time Protocol on page 67
Overview
Using ExtremeWare, you can manage the switch using the following methods:
• Access the CLI by connecting a terminal (or workstation with terminal-emulation software) to the
console port.
• Access the switch remotely using TCP/IP through one of the switch ports. Remote access includes:
— Telnet using the CLI interface.
— SSH2 using the CLI interface.
— SNMP access using ExtremeWare Enterprise Manager or another SNMP manager.
The switch supports up to the following number of concurrent user sessions:
• One console session
• Eight Telnet sessions
• Eight SSH2 sessions