Extron electronics MAV Plus Series - Command;Response Table for SIS Commands

Programmer’s Guide, cont’d
CrossPoint / MAV Matrix Switchers • Programmer’s Guide
4-10
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Create ties
N
X@
= Input number 00 – (maximum number of inputs for your model) (00 = untied)
X#
= Output number 01 – (maximum number of outputs for your model)
N
 • Commandscanbeenteredback-to-backinastring,withnospaces.Forexample:1*1!02*02&003*003%4*24$.
•
The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
•
Thematrixswitcherssupport1-,2-,and3-digitnumericentries(1*1!,02*02&,or003*003%).
N
 The& tiecommandforRGBandthe%tie command for video can be used interchangeably on the matrix switchers.
Tie input
X@ to output X#,
video and audio
X@
*
X#
! Out
X#•
In
X@•
All
]
Tie input
X@
‘s video and
audio to output
X#
.
Example:
1*3!
Out03
•
In01
•
All
]
Tie input 1 video and audio
to output 3.
Tie input
X@ to output X#,
RGBHV only
X@
*
X#
& Out
X#•
In
X@•
RGB
]
Audio breakaway.
Example
(see 2nd Note, above):
10*4&
Out04
•
In10
•
RGB
]
Tieinput10RGBtooutput4.
Tie input
X@ to output X#,
video only
X@
*
X#
% Out
X#•
In
X@•
Vid
]
Audio breakaway.
Example
(see 2nd Note, above)
7*5%
Out05
•
In07
•
Vid
]
Tie input 7 video to output 5.
Tie input
X@ to output X#,
audio only
X@
*
X#
$ Out
X#•
In
X@•
Aud
]
Audio breakaway.
Example:
24*04$
Out04
•
In24
•
Aud
]
Tieinput24audiotooutput4.
Quick multiple tie
E
+Q
X@
*
X#
!...
X@
*
X#
$
}
Qik
]
Example:
E
+Q3*4!3*5%3*6$
}
Qik
]
Tie input 3 video and audio
tooutput4,tieinput3video
to output 5, and tie input 3
audiotooutput6.
Tie input to all outputs,
video and audio
X@
*! In
X@•
All
]
Example:
5*!
In05
•
All
]
Tie input 5 video and audio
to all outputs.
Tie input to all outputs,
RGBHV only
X@
*& In
X@•
RGB
]
Audio breakaway.
Example
(see 2nd Note, above):
28*&
In28
•
RGB
]
Tieinput28RGBtoall
outputs.
Tie input to all outputs,
video only
X@
*% In
X@•
Vid
]
Audio breakaway.
Example
(see 2nd Note, above):
14*%
In14
•
Vid
]
Tieinput14videotoall
outputs.
Tie input to all outputs,
audio only
X@
*$ In
X@•
Aud
]
Audio breakaway.
View ties
N
X@
= Input number 00 – (maximum number of inputs for your model) (00 = untied)
X#
= Output number 01 – (maximum number of outputs for your model)
N
 The&view tiecommandforRGBandthe%view tie command for video can be used interchangeably on the matrix
switchers.
View RGB
output tie
X#
&
X@]
RGBHV input
X@
is tied to
output
X#
.
View video
output tie
X#
%
X@]
Video input
X@
is tied to
output
X#
.
View audio
output tie
X#
$
X@]
Audio input
X@
is tied to
output
X#
.
Command/response table for SIS commands