Extron electronics MAV Plus Series - Status Tab; System Status Page

6-3
CrossPoint / MAV Matrix Switchers • HTML Operation
a. Doestheaddressincludeaspeciclename,suchas
10.13.156.10/le_name.html?If so,theswitcherdownloadsthatHTML
page.
b. Istherealeintheswitcher’smemorythatisnamed“index.html”?
If so,theswitcherdownloads“index.html”asthedefaultstartuppage.
c. If neither of the above conditions is true, the switcher downloads the
factory-installeddefaultstartuppage,“nortxe_index.html”(gure6-2),
alsoknownastheSystemStatuspage.
Status Tab
System Status page
TheSystemStatuspage(gure6-2)providesanoverallviewofthestatusofthe
matrix switcher, including the primary and secondary power supply status, the
individualvoltages,andthefanstatus(ifapplicable).TheSystemStatuspageis
the default page that the switcher downloads when you connect to the switcher.
AccesstheSystemStatuspagefromotherpagesbyclickingtheStatus tab.
DSVP
Refresh
Figure 6-2 — System Status page
Components that are operating properly are indicated in green.
Failures are indicated in red.
Not displayed for the CrossPoint or MAV
N
Smaller switchers (16 x 16 matrix sizes and smaller) do not show the power
supply and fan status blocks.
The system status page periodically updates itself to reflect the latest status of the
switcher components.