Extron electronics MAV Plus Series - Preferences Menu

Matrix Software, cont’d
CrossPoint / MAV Matrix Switchers • Matrix Software
5-22
Preferences menu
Immediate changes — Causes configuration changes to take
effect immediately.
Hold/verify changes —Delaysimplementationof
congurationchangesuntiltheChanges–Take button
is pressed.
Ties as lines —Displaystiesaslines(gure5-16).
Figure 5-16 — Ties shown as lines
Ties as crosspoints —Displaystiesasagridofinputsandoutputs(gure5-17).
Ties that have been made are indicated as amber (video and audio), green
(video only), and red (audio only) boxes. Ties that will take effect when you
click the Takebuttonareindicatedby+.Tiesthatwillbebrokenwhenyou
click the Takebuttonareindicatedby–.
Figure 5-17 — Ties shown as crosspoints
Frequency read options(CrossPointonly)— Allows you to set the input signal
detection(DSVP)featureasfollows:
• Toneversampleanddisplaythesyncornosyncstatus
(set this option to None)
• Toautomaticallyrefreshthedisplay
(set this option to Automatically every 10 seconds)
• Tosamplethesyncandupdatethedisplaywheneveryoumakea
configuration change (set this option to On demand or by refresh).
Limit ties to same group — Allows you to limit the creation of ties using the
program to inputs and outputs that are in the same group (similar to front
panel operation).