Extron electronics MAV Plus Series - Page 17

1-7
CrossPoint / MAV Matrix Switchers • Introduction
• MAV1212Plus(12inputsby12outputs)
 SVA  SV
 AV  V
•
MAV1616Plus(16inputsby16outputs)
 HDA  HD
 SVA  SV
 AV  V  A
•
MAV2412Plus(24inputsby12outputs)
 SVA  SV
 AV  V  A
•
MAV2424Plus(24inputsby24outputs)
 SVA  SV
 AV  V  A
•
MAV3216Plus(32inputsby16outputs)
 SVA  SV
 AV  V  A
•
MAV3232Plus(32inputsby32outputs)
 SVA  SV
 AV  V  A
MAVPlusHDAandHDswitcherscanalsoroutelowresolutionRGsBandRsGsBs
videosignals.HDAandHDswitcherscanalsoroutemultiplecompositevideo
planesorS-videoandcompositevideo.Ifusedinthisway,thevariousvideo
planes cannot be broken away; the input signals on the Y, R-Y, and B-Y input BNCs
must be routed to the same outputs.
MAVPlusSVAandSVswitcherscanalsobeusedtoswitchtwoplanesof
compositevideo.Ifusedinthisway,thetwovideoplanescannotbebrokenaway;
the input signals on the luma and chroma input BNCs must be routed to the same
outputs.
TheMAVPlusSeriesswitchershaveabandwidthof150MHz(-3dB).