EasyManua.ls Logo

Extron electronics MAV Plus Series - Page 51

Extron electronics MAV Plus Series
214 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-7
CrossPoint / MAV Matrix Switchers • Operation
d
Preset button —ThePresetbuttonhastwoprimaryfunctions(•)andthree
secondary functions ():
• ActivatesSave Preset mode to save a configuration as a preset and Recall
Preset mode to activate a previously-defined preset.
• BlinkswhenSave Preset mode is active and lights steadily when Recall
Preset mode is active.
IntheI/O Group mode, select group 2 and indicate the selection.
See“I/Ogrouping”onpage3-24.
With the Enter, View, and Esc buttons, select Serial Port Selection and
Configurationmode.See“SelectingtherearpanelRemoteportprotocol
andbaudrate”onpage3-54.
Select19200baudfortherearpanelRS-232/RS-422portinSerial Port
Selection and Configurationmodeandindicatetheselection.See“Selecting
therearpanelRemoteportprotocolandbaudrate”onpage3-54.
e
View (
<
) button — The View (
<
) buttonhasoneprimaryfunction(•)andsix
secondary functions ():
• SelectandindicateView-only mode, which displays the current
configuration.
N
View-only mode also provides a way to mute and unmute the outputs. See
“Muting and unmuting video and/or audio outputs” on page 3-35.
IntheI/O Group mode, select group 3 and indicate the selection.
See“I/Ogrouping”onpage3-24.
(CrossPoint switchers)DecreasetheRGBdelayofswitchestothe
selectedoutput.See“SettingRGBdelay(CrossPointSwitchers)”on
page3-28.
(Audio models)Decreasetheaudioleveloftheselectedinput.
See“Viewingandadjustingtheinputaudiolevel(audiomodels)”on
page3-38.
(Audio models)Decreasethevolumeoftheselectedoutput.
See“Viewingandadjustingtheoutputvolume(audiomodels)”on
page3-44.
WiththeEnter,Preset,andEscbuttons,selectSerial Port Selection and
Configurationmode.See“SelectingtherearpanelRemoteportprotocol
andbaudrate”onpage3-54.
Select38400baudfortherearpanelRS-232/RS-422portinSerial Port
Selection and Configurationmode,andindicatetheselectionSee“Selecting
therearpanelRemoteportprotocolandbaudrate”onpage3-54.

Table of Contents

Related product manuals