SYMBOLS
The WARNING symbol indicates a potentially hazardous condition/situation. The safety warnings throughout this
manual, and on your equipment, if any, are for the protection of people and property. Failure by any operator to
abide by safety warnings will result in a waiver of all liabilities, loss of your warranty, and could result in equipment
damage and or failure, property damage, risk of serious bodily injury, and or death. The symbol may appear in
various colors and in conjunction with other symbols.
The NOTE symbol indicates important information. Failure to obey all notes could result in improper operation,
less-than-optimum equipment performance, and at the sole discretion of the equipment manufacturer, may void
your warranty. The symbol may appear in various colors and in conjunction with other symbols.
WARNING!
Rated load: 325 lbs. NEVER EXCEED RATED LOAD.
Product is non-returnable if the sealed bag containing the TILT is opened or altered.
Use the TILT only with a qualified helper.
Manufacturer recommends professional installation.
Read this manual in its entirety before installation. Understand and learn the location and function of all the
features, safety devices, and labels before operating. Correct installation, proper use, and following of instructions
and obeying safety warnings of the TILT are necessary for safe operation.
For use with secure, properly mounted, floor mounted toilets only.
Observe and avoid all pinch points and always keep hands above the seat when operating the TILT.
Ensure that there is no interference within the TILT’s range of movement.
To prevent slipping, it is important to wear footwear with firm, non-skid soles when using the TILT.
Remove loose rugs and make sure that the area around the TILT is free of all obstructions and moisture.
The TILT is strictly an assist lift. The patient must have dexterity, strength, and balance in order to use the TILT safely.
Non-responsive or combative patients may not be suitable for TILT usage.
When using TILT, never let clothing contact the TILT seat; clothing can make the seat slippery and dangerous!
Do not use TILT for anything other than its intended purpose.
Never use TILT as a chair, only sit on TILT when it is being used as intended.
Before and during TILT operation, ensure all hair, jewelry, shirts, ties, shoe laces, and all other forms other personal
attire and ornamentation are not, and do not, hang up on anything that may create a hazard.
Never modify the TILT or any of its components. Padded toilet seats cannot be used with the TILT.
Periodic inspections by a qualified technician are recommended to help prevent unsafe conditions. Regularly check
that all parts are in good condition and verify all hardware and other fasteners are undamaged and secure. If any
part of the system is damaged, loose, or faulty, DO NOT USE until repairs can be made by a qualified technician.
Do not route power cords so that they may become damaged, pinched, create trip hazards, or create other safety
concerns. Check all TILT electrical cords frequently to ensure they are not worn or damaged. Stop using TILT
immediately and contact your Certified Dealer or Technician if any defect is suspected. DO NOT patch damaged
cords.
To reduce risk of shock and or electrical hazard, keep all electrical components free from moisture at all times and
only use properly grounded electrical equipment, outlets, and plugs.
The TILT is not a toy; never play on or near the lift.
Do not continually operate the hoist functions. The system is not designed as an exercise machine and continuous
operation will cause batteries to be deeply discharged and or to damage the actuator or control box by overheating.
Do not pull on, or otherwise exert excessive force on, the handset cable as this may break off the wires inside the
cable and prevent some or all TILT operations.
If TILT is not lifting, do not continue to repeatedly press handset buttons because the actuator has either reached its
end position, the load is too great, or there is another problem.
Maintaining all labels and manuals in legible condition is required by the TILT owner and is essential for safe
operation. Contact your Certified Dealer or Technician for additional information, replacement labels and manuals,
or to schedule inspections, repairs or service. For additional care, use or safety information, call 1-800-451-1903 or
visit us at www.ezaccess.com.
Information in this document is subject to change without notice. The most current version of this manual is
available on our website at www.ezaccess.com.
Before installation, ensure that there is enough space for proper TILT operation.
Attempting to tamper with or modify any portion of the TILT will void the warranty and could create a hazardous
situation.
To Next Page
Loading...
Need help?
General
