EZ-ACCESS TILT User Manual

Page | 4
NOTES
Information in this document is subject to change without notice. The most current version of this manual is
available on our website at www.ezaccess.com.
Before installation, ensure that there is enough space for proper TILT operation.
The TILT warranty is not transferable. Attempting to tamper with or modify any portion of the TILT will void the
warranty. Using the TILT for anything other than its intended purpose will void the warranty.
BOX CONTENTS
• Open box and inspect contents for shipping damage before use. In case of damage, DO NOT USE the TILT.
Please call 1-800-451-1903 for further instructions.
• Product is non-returnable if the sealed bag containing the TILT is opened or altered.
TOOLS/HARDWARE NEEDED
 5/8” wrench or socket
 Locking pliers

9/16” wrench or socket

Mounting bracket hardware
 Power drill
 Drill bit sized for your chosen hardware

3 mm hex key
HARDWARE CONTENTS
QTY
DESCRIPTION
VISUAL
2 PLASTIC TOWER NUT
2 WASHER FLAT .375 X .875 X .06 TEFLON
2 BOLT HEX .375-16 X 1.75 GRADE 18-8, PARTIAL THREAD

EZ-ACCESS TILT Specifications

General

Brand	EZ-ACCESS
Model	TILT
Category	Lifting Systems
Language	English