OPERATING PROCEDURES
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
27
Owner’s Manual
OPERATING PROCEDURES
SERIAL NUMBER LOCATION
Three serial number and manufacture date code labels are on the vehicle. One of the labels is found on the steering col-
umn, the second label is found on the frame member under the front splash shied on the driver side, and the third is
found on the passenger side frame rail at the rear of the vehicle (Figure 1).
Design changes occur continuously. When you order service parts, the PIN number, manufacture date code or serial
number must be available.
Figure 1 Serial Number Locations
Serial Number
Serial Number Location on Front Frame
Serial Number
Serial Number Location on Rear Frame
Serial Number
Serial Number Location on Steering Column
To Next Page
Loading...
